Many people report that the heating temperature of their own water floor heating is not very ideal, and even the floor heating installed in some homes has no temperature at all. Spending money however not getting the preferred heating impact is honestly full of complaints. So, why can't the temperature of the water and floor heating at home go up?

Alsavo, as a famous air source heat pump supplier, will take you to understand the reasons.

1.The pressure of the floor heating pipeline is not enough

Phenomenon: The pressure of the pipeline is not enough, resulting in unsatisfactory heating effect.

Solution: Consider installing an air source heat pump to improve the circulation of hot water to achieve the ideal heating effect. You can ask heat pump companies to recommend models.

2.The floor heating filter is clogged

Phenomenon: If the water supply main is not hot, it may be because the water quality is too poor or too dirty, so that the filter is blocked, thus affecting the normal circulation of the system.

Solution: first close the water supply valve and the return water valve, then open the filter with a live wrench to clean the filter screen inside, and finally install it back. If you are afraid of damaging the filter yourself, you can ask a professional to clean it.

3.There is gas in the floor heating pipe

Phenomenon: Turn on the floor heating switch, if it is found that the main bar of floor heating is hot but the return bar is not hot, it means that there is gas in the pipeline, so that the hot water cannot enter the circuit for circulation.

Solution: Open the air release valve of the water separator directly to exhaust until hot water comes out.

4.Too many floor heating covers

Phenomenon: The heat of the floor heating is uploaded from the bottom to the top. If there are too many floor heating coverings and occupy most of the room, it will affect the heat dissipation. Then the effective heat dissipation area is small, and it is easy for people to mistakenly think that the floor heating is not hot.

Solution: Use furniture with legs as far as possible, and do not lay a large area of blankets on the indoor floor, which is not conducive to heat dissipation. Although blankets are comfortable to step on, this will greatly affect the effect of heat dissipation.

5.Floor heating pipeline embolism

Phenomenon: There will be pipe scaling every year when using floor heating. The average scale is 1 mm per year, which seems to be very little and not much, but this 1 mm may cause the water temperature to drop by 6-8 degrees Celsius, and there will be sludge in central heating. Problems such as bacteria and algae appear, so if it is not cleaned regularly, it will lead to embolism of the floor heating pipeline.

Solution: Generally speaking, the floor heating pipes are cleaned once every 3 to 5 years on average, while other equipment should be cleaned before use every year. This should be done by a professional floor heating cleaning company. If the floor heating distribution is not clear , try not to clean it by yourself, it is easy to cause damage to the floor heating due to operational errors.