Customized Namur Solenoid Introduction The double acting actuator Valve Pneumatic is a pneumatic solenoid valve specifically designed to control large actuators over 300 sizes. Secondly, it is suitable for cylinder valve actuators operating double-acting cylinders in pneumatic control systems. And we also have single coil and double coil available. Finally, our product is inexpensive and good quality, which is loved by our customers. Feature The double acting actuator Valve Pneumatic adopts double piston symmetrical structure of rack and piston, which makes the action fast and stable and has the characteristics of high precision and high output power. Secondly, our cylinder body makes its service life longer and the friction coefficient becomes lower. Finally, our double-acting actuator and single-acting actuator both have the same cylinder body and end cover, which makes it easy to change the action mode. Product Parameter Model NO.4V510-15B Port sizeG1/2 Working modeSingle acting Material of pilot headAluminum alloy Working MediumAir (40聽micro聽filtered ) Acting ModeInternal inductive type Sectional area50mm2(Cv=2.79) Range of working pressure1.5~8.0Kgf/cm2(21-114Psi) Max聽tolerance pressure12Kgf/cm2(170.6Psi) Working temperature-5~50C Working voltageDC12V,24V,AC36V,110VAC,220VAC,380VAC Voltage range-10%~+10% Power consumptionAC380V:2.5VA AC220V:5.5VA AC110V:5.5VA DC24V:3W DC12V:4.8W InsulationF Class Protective classIP65 Max acting frequencyfive times per second Excitation聽time0.05S Connection formLeading wire or terminal connector type Application of valve with pneumatic actuator聽Customized Namur Solenoid website:http://www.nbyxpc.net/solenoid-valve/namur-solenoid/